Hi there Jez again, con rod kit req,and also outlet valves,will these parts out of any other bike fit,carnt get the parts and been trying for four weeks to get in touch with mike hodges.Also does anyone know where timing marks are, i cannot find the bloody things. jez
Hi there,i have not posted many threads but needs must,my 03 570 vert last week suddenly came to a halt with a nasty rattling noise.Have not had chance to have a look yet,but does anyone know who could repair it and also where to get the parts from,it is not ceased and seems not to have any...
hi can anyone tell me where i can get a side panel for my vert e501 03model new or second hand i am in the uk cheers
Just spotted someone making billet engine bits on ebay uk
Hi guys, I've listed my Vertemati collection for sale in the classified section. Check it out. Thanks, Ken
I am in need of a stator to get my S501 back up and running. I have seen the Electrex replacement listed as an alternative but no confirmation on if anyone has used one successfully. Suggestion? Links to vendors? I am in the US, eastcoast, but I am willing to purchase from wherever I need...
Just preparing the S501 for The MOT, The Doma exhaust needs a baffle, which I have turned up a sleve to fit an aftermarket one in. Also the exhaust keeps blowing the indicator off so I removed them all! Recently I (stupidly) sat on the bike with the side stand down and it snapped:damn: ...
I recently bought a 02 C500 from a friend who raced the 4-stroke nationals on it about 8 years ago. since I have had the bike i rode it in the dirt once and can say I loved it. much better handling and power than my 08 ktm 250xc. but with all that being said i would much rather keep racing the...
A few months ago a bought a 02 500C to trail ride. I already took it on a recent trip to KY and the bike is alot of fun in the woods. Alot different than my TM 250 2 stroke! The Vert is in OK condtion, it runs great, I'm still amazed at how easy it is to start but it's needs some work to bring it...
Do you all think it would be a good idea to post on here a list of alternative parts sourced from easier/ more readily available suppliers. Like the oil filter is HF 181 for aprilia scooters upto 125 between 99-02 I did notice the rectifier was a ducati part? or is it just my bike?
hi can any one tell me where i can get a wiring diagram for my 501 i want to put the indicators back on and the wiring is a mess also where i can get a side number plate in white from exhaust side and i am having problems with the clutch when pulling off it makes a funny noise and the bike...
Anyone know the best place to get Vertemati parts in the U.K?
Vertemati ( STM ) SLIPPER clutches are here........:bannana::bannana:Any one how wants a slipper clutch for a Vert let me konw £ 855. + Postage ( STM)
Ordered 2 twin air air filters in JAN and after many phone calls including ones to the netherlands to their main office they have arrived.I had actually given up on them ever turning up.
I have got the S501 back on the road for the 2010 season:bannana: At the moment it is with Tim Blakemore racing getting set up on the Dyno. Latest mods Full Doma system (Thanks Ralf) Brand new FCR 39 MX Rad catch tank Fuel catch tank
my s501sm is now for sale, engine expired today. i have had enough.anybody interested contact me on 01452 547894.location gloucester.i want £1000 to take it away,there are some spares-stator,gaskets,oilfilters etc that will go with it.taxed till april+mot may.i wont take less.if not sold will take...
Great lighting, but camera phone. Never mind the Pirelli SC front. Dunlop slick is going on in the next day or two. Doing SM practice at BeaveRun on Thursday. BTW-I fired her up and ran her around the neighborhood this evening and she ran great. It was all I could do to keep myself...
Today i´ve got a nice package.:thumbup: The very last ever built Doma exhaust for Vertematis. I mailed to the german Doma importer and asked whether the Doma exhaust is still available for Vertematis. Two days later he called me by telehone directly from the factory in Belgium and told me there...
To all Friends of Fine Handmade Italian Machinery: we are planning the 1st International Vertemati Jamboree from September 9th to September 11th, 2010 at the Wallrav Race Center in Stary Kisielin, Poland Price: 195EUR per participant, this includes: ° 3 days of free riding (08:00-16:00...
Proper Chrimbo! It's finally let go. Racing over the Christmas period has finally seen the demise of my SR570 Vertemati. Can't really complain as it's given great service up to now, but ironic after the recent discussions on L/H cover oil way modifications and the like... I don't think it's...
Any one have Zeta Levers on their Vert. I thought that the KTM ones would fit! I bought the brembo clutch and brake levers and Had to take 0.5mm from the pivot on the brake and the clutch (brembo) wont even look at the mount. Do you think a Later KTM clutch master cyl will be ok to use?
anyone out there help,looking for a side stand.mine has just broken in two.there are two on ebay germany, but at £80 plus postage far too much.
Anybody know if there is one available? I've heard that possibly a Husaberg clutch is interchangeable..
It is time to sell my S501. reason for sale, I do not have the time to ride it since other toys have priority. it is in immaculate condition.all mods have been done crank, oilways only 80miles ago..original manual available, toolkit.less than 2000km covered. £2200 thank you my mob 07775...
Decided to sell the Vertemati as I need a bike that can handle some longer distances. I just don't have the room for two bikes. Most people on the forum know the bike is totally sorted with the modified crank, FCR etc. Considering the specification I am looking for £2,400 o.n.o. Any...
Recently purchased a 99 Vert Black Stallion limited edition.I want to SM it and any help or tips on what kit would be the best would be appreciated.
Hi All Do any of you have a rod you can measure, or know the dimensions off hand and can post them here for me. Any help would be great. Cheers Shaw
Hey there, Im looking for a Vertemati SM. Im in Tx and dont mind a drive. What have you got??
1 early 500 and 3 501's on ebay uk. its nearly summer then!
I've just switched my C500 back to it's MX setup and now I can't get it to start. I think I've narrowed it down to fuel not flowing from the gas tank to the Del'Oroto carb. I loosened the float bowl drain nut. My question is shouldn't fuel be flowing out of here? I've checked for pinched fuel lines...
Right then Not a new thread really, just a revisit on an old one. I have just bought a keihin FCR MX 41mm carb to go on my S570e. I could probably make an inspired guess on a starting point for the jetting, being pretty familiar with these carbs on Berg 650's. But then again I know that...
possibly i will be be looking for two exhaust valves+new head gasket for my 2002 s501. i ordered and payed the vertemati brothers 209 euros for the above,but they have failed to turn up.an e-mail from guido on nov 16 said he had sent them,but i have a horrible feeling i may have been ripped off as...
Bristol Italian Auto Moto Festival Saturday 25th April 2009 www.biamf.co.uk Organised by local members of the Ducati Owners Club and the Italian Auto Moto Clubs and now in its seventh year, the Festival is the best free event for Italian vehicle enthusiasts in the UK. Focussed around Corn...
Hi there, just got vert 570, its running a dellorto phm 38,reading some of the posts, which carb is the best one and is it a easy swap also where can the carbs be purchased here in the uk. Cheers Jez.
Hi anybody knows how to set the timing gears my vert has just been put together ,it runs but it vibrates stronger than before
I have had a pair of rear sprocket spacers made. Any one interested in buying one £38.00. I will post some pictures up next week.
any one out there know head + cam bolt torque settings.two new exhaust valves+head gasket on the way from the vertemati bros.got to get it right first time.overeved engine and bent a valve-oops,dave
I've set-up my C500 for Dual Sport, license plate and all. Took it for a ride around our family ranch today. My first time off-road with the bike. It's a fantastic dirt bike, though not so surprising considering Vertemati has it's root in MotoCross. The only thing that needs work is the grabby...
Hi All I will be running off some oil filter gaskets in the not too distant future. Is any one interested in having some? I will get the pricing sorted in the next week or so. Shaw
I have found for sale an unregistered S501E with nine miles on the clock. Anyone like to hazard a guess as to what would be a fair offer on the price side for it? Yorkshire Tard
Few Pictures of my S570 now it's back together. I have done about 500Km since the rebuild and four oil changes!
One 501 and one 570e supermoto's Due to old injuries catching up with me they are for sale to finance a new big scooter The 570 has been rebuilt and modded by Mike Hodges and now has a what should be a good strong engine (receipt and details can be provided).501 has modded crankcase but not the...
I thought I'd post a couple of new pics.
What size rear do people fit? I have a 160 rear on but it gets a bit chewed by the drive chain .Any mods to prevent this happening?I have a 150 rear on my other vert and this get chewed aswell but not as much. Any info most appreciated. Steve
Disposing of a collection of Verts; 1. C500 - new 2. C501 - new 3. C570 - new 4. S501 - new 5. E501 - new 6. SR570E - 1200 miles 7. SR450 - used - Arrows Rod - modified crank oilway 8. SR600 - used - same 9. C570 dismantled engine- needs piston big end liner and rebuild
I prepped my bike tonight for supermoto practice at BeaveRun tomorrow. I can't say I ever look forward to wrenching, I would rather ride; but I also know if I want it done right (or at all), it is gonna have to be me who does the wrenching. Man, these bikes are just so beautiful. Moto art or moto...
http://www.vertemati.com/
Vertemati connoisseurs, unite! I have bought a 2003 SM570 with a broken engine (crank destroyed, misc parts missing). Instead of rebuilding the engine, I've bought a new engine from Vertemati and will assemble the bike shortly. Since I haven't used this bike before, can any of you give me...
Few pictures from our outing to the Ace Cafe today, just two Verts in the hundreds of Italian bikes that showed up. 70 mile round trip for both Verts with no drama's apart from my number plate falling off 1 mile from home. Great day, thanks to Shaw for the idea.
i have been look to buy one of these beautiful machines and cant find one anywhere, i was really looking into the sr600 or 570, but does anyone have one for sale or know where i can get one? if you have pic that would help out alot
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
