Forum: Ryan Moore's Supermoto Street Style

what parts from what bikes are used or is there a setup available to purchase that already has everything i will need?

waiting list for 50stunt WR250X 12bar (greg I added you, -12oclocker) anyone one else to jump on the list post up. :thumbup: 1.) 12oclocker 2.) Dirty Dan 3.) gregli

Hi guys! This is my new CRF450R 2009. Just almost finished it yesterday..

Hey, Ryan Moore here, I have to start this forum off with a special thanks to Supermoto Junkie for recognizing the growing sport of supermoto street style and settin us up with a forum to share pics/vids/bike settup tips/tech support. It is an honor to be apart of the site :bowdown: Ryan Moore...

Ok so I have a 06 drz 400 with a full yoshi exhaust, 3x3 mod and jetting. I cannot pull the bike up in second if my life depended on it, I have tried doing it at 18mph, 20,22 ect. I only weigh 120. I can bring the bike up in 1st without a problem but I run out of gear. I would really like to bring...

Is learning to wheelie a sportsbike much harder than wheelying a supermoto? I've managed just over a mile and a half on my DRZ so am becoming more familiar with the balance point and rear brake use and have just got a handbrake so I can get into seatstanders etc. I want to get into wheelying my 636...

im getting a crf150r wanna use as a practice stunt bike can i use the crf/xr100 stunt parts or the crf450r stunt parts or do i have to custom build them or does anyone have any stunt parts for sale for this bike

been around for a while I been stunting 50s dirtbikes and streetbikes currently now I own a f4i and a crf150r here is some pics and whatnot just to introduce myself I hope to get my crfR setup much more supermoto style soon if anybody wants to help me find some supermoto whells for...

im building a WR450 in to a supermoto stunt bike & im not having much luck with the build. im trying to run a WRX FTi dual caliper hand brake & its just not working for me:damn::damn::damn: the X runs a 230mm disk & im not able to find one, then the X run 5mm bolts and the WRF runs 6mm bolts,...

http://www.vimeo.com/13672900

ok this post is to hunt down and find someone here that is willing to take my money! I've given up on full throttle after numerous un responded emails and bad talk from other forum members about their customer service and long long awaited shipments.... I'm in need of dual rear caliper mount,...

Hi, I have a 2000 Wr400 and im going to be running a handbrake on the origional calliper, what is my best bet for a left hand master cylinder? Can i use a Radial front master cylinder of a sportsbike and use it upside down ? will it still work? Or is something like this my best bet? ...

i know ive seen people talk about it on here before i just cant seem to find the thread. can any one help me out?? either post a link to the right thread or give me some pointers on hookin up an adjuster on my 250

Ryan! Got a chance to meet HollywoodB--what a nice guy! He's up here in Idaho on business and a mutual friend called and said "Come over and bring your Motard!" So I did. He got to stunt the DRZ and, man, did he like it! He was smiling and laughing and having a good time. I do believe...

Anyone managed to pull highchairs on a DRZ 400 sm with standard gearing? Iv been tryin in 2nd gear and been getting about 5 or 6 inches height, is it possible to get it right up or am I wasting my time on standard gearing?

First real "photosession" this summer so I thought I'd post up some pics :D Mostly pics of me, some of my friend practicing aswell :thumbup:

Hi everyone, im new to stunting and im completely hooked. I ride a 2004 Wr450 Sm. How do you guys 180 endo? I can endo from 80mph to a dead stop at a good angle but can only swing the back end round sometimes. What is the trick to getting it round and at the right time and not ending up landing...

been riding sumo for two weeks. havent had too much time riding drifting, do to the lack of knowlege. Any helpfull tip and techniques well be great. what sproket set up is best. thax in advance...

Me and some friends have been scouting the city for interesting places to ride and we found a nice set of 4 or 5 beginner stairs. Riding down a set of stairs is pretty self evident. But how do you ride up a set of stairs? I keep thinking if I just ride into the bottom step the bike will stop...

I am really considering getting into stunting the WR250X , but I wanted to ask some questions: Can you still ride twisties with the 50 stunt axel and street pegs without them dragging (guessing not, but want to see anyways)? Do the rear axel sliders fit the front too? I saw someone used to...

I finally got a DRZ in my shop for a few days and came up with some goodies that people have been requesting for years now. Front axle sliders Rear axle sliders case savers passenger pegs I have the sliders in 2 different legths, 2.25 for the stunt riders, and 1.25 for the street riders....

Finally got my 50 stunt pegs mounted up. So are you guys bouncing on them to compress the suspension while pulling up on the handlebars? Just looking for a couple tips or tricks before hitting up some parking lots! thanks

what is the best sprocket for me to use to start stuntin my stock CRF50 only thing ive done so far is the big bar kit

Hey guys, I want to add my axle sliders for the DRZ, can anyone give me a real accurate measurement of the front and rear axle. here is what I am looking for length of axle diameter of through hole diameter of opening on each end. all measurements to .xxx decimal in inches except the...

Check it out, this is a section in Hollywood B's new dvd coming out in a month or so. He let me penetrate a street bike dvd with some supermoto action! There are some local shots, some shots from My DVD, MXD, and some Russia shots. Its one of my favorite clips so far. Thanks to Eric at Tempt...

I love stoppies. Im able to roll them out a little bit. Im pretty sure i hit balance point last night. How big is the balance point? is it a narrow window?

Check it out, Ryan Stephen came out from WI to sunny CA and put some time on the 50stunt wr250x. http://www.50stunt.com/

ok guys im going to get a sprocket and chain soon and id like to know what everyone is running and how they like it and if they wish they would have went bigger or not so big haha. so let me know what you have on there and how you like it. also where did you get your sprocket and chain? i will buy...

First of all Im no PRO .... like Ryan or anything, but i can say I am the best in my city from the couple SM and street bikes around. I was asked by RedBull to due a small pre-show, stunt show for a Formula 1 activity going on down here in the Dominican Republic, Its basically a F1 running around...

i am looking to make my wr250x front forks stiffer and rear end stiffer. what rear springs from other bikes fit the wr250x and are stiffer? i want a really stiff spring in the back. and id also like some stiffer front fork springs so if you guys know what other models fit and where to get them...

Hope your feeling better these days. I have been a avid watcher for some time now.... I have a question on a set up.. I purchased from a friend a set of Stunt pegs that you made some time ago and i said that he had them mounted on a DRZ.. I really dont see how but i think i will need to make up...

Hey every one, first off I want to take the opportunity to give Ryan a big hand for doing what he is doing :clap: He is one of many stunt riding bikes but one of only a few doing it with as much passion and respect for the sport and the supporters. I have had the honer of working with Ryan for...

check it out ! just updated the site let me know what you think. freestylesupermoto.com

to Ryan I need stunt pegs for a sxv. Ideas? Just fir some standups on the freeway

Hi, im really struggling to get the hang of maintaining balance point with the use of the rear brake on my DRZ 400sm, only started learning last year and i learnt how to shift through 2nd, 3rd and 4th gear on the back wheel, then the past couple of months i've managed to hold them further and...

Ryan, I bought a set of stunt pegs from you for my SXV and finally got home from vacation and getting around to mount them. Do I need to cut the side panel so that it fits around the bracket? I looked up a picture of your pegs on an SXV and it doesn't look like the side panel is cut, but the...

Hi, I´m riding a DRZ 400 SM and I want to start stuntriding. My questions are: Has anbody a wheelie bar? Or do I cut a hole in the fender? I saw it one youtube. Or what is a good solution? Do I have to use more oil, if I do long or slow wheelies? thanks

Plug and Play!, just finished the prototype, check it out. http://www.youtube.com/watch?v=JaweK1eu0sw

http://www.youtube.com/watch?v=qUqJAUTwWns

Ok so for some time now i've really been wanting to start doing stand ups (with the hopes of doing some harder stuff down the road), and finally decided its time to learn.. today is my 2nd time of actually trying them so I thought I would post up some pics (since i've got no vid yet) for some...