alright i just wanted to start this thread to see everyones sm, mod list. so we can all share ideas see just what everyone has done to their ride. ill start with mine.
mods :
full ti yosh pipe
3x3 mod
dj kit stage 2
cycra pro bend with triple side mount
galfer ss lines with built in cooler
pro taper bars 1 1/8
red axle blocks thanks to APA :thumbup:
clear led real light
crash bobbins
ufo supermoto fender
thumpertalk case covers
removed the kickstand switch along with the switch on the clutch so just hitting the start button is all u need to do of course as long as its in neutral
i plan on getting a fcr39 mx carb by end of summer.
this supermoto thing is so much fun im really trying to sell my 600 track bike so i can also geta 450 supermoto. i have no interest in my sport bike at this time!
Aftermarket upgrades: Keihin FCR flatslide carb (the Thumpertalk/Sudco kit made for the DRZ), full Yoshimura exhaust, HotCams cams, K&N air filter, MXtech springs for 230 pound rider, Venhill stainless brake lines, Zeta folding levers, SME axle sliders, APA muffler slider, fuel catch can, Acerbis handguards with integrated turn signals, LED taillight with integrated turn signals, supermoto pegs with sliders, Acerbis supermoto front fender, Renthal Fatbars.
New parts installed last season: plastics, custom graphics kit, rear tire, RK chain, battery.
Thanks for the reply Zorro and the pics.
I'm gonna keep cutting away until I make it fit and
use your idea with the spacers.
My bike is an 08 with the big handle bar clamp up top.
The middle of the clamp is mostly for appearance.
Do you still run the stock bar clamps on yours?
2005 DRZ E:
Excell SM wheels and tires
Cyrca Sm handguards
1 1/8 handlerbars
Trail tech mounted in bar pad.
number plate/headlight
cut fenders and side plates
RMZ 450 exhaust (cut)
Home made plate brack with led plate lights
led tail light
various vynil'd things
stock FCR39 jetted with aibox unpluged
My 2006. Pretty much the same as all the others. 440, fcr 39mm, 3x3, jetted, full yoshi, turkey baster, edge tail light, michelin power ones, stainless brake lines, skateboard wheels, peg sliders, under bar mirrors, other stuff.
My 2006. Pretty much the same as all the others. 440, fcr 39mm, 3x3, jetted, full yoshi, turkey baster, edge tail light, michelin power ones, stainless brake lines, skateboard wheels, peg sliders, under bar mirrors, other stuff.
Just got my new frame guards and case covers on. Covered the case savers in that fake carbon fiber vinyl stuff then sprayed them with a few coats of high temp clear coat.
Didn't notice any gains or any losses. Just louder. I cut a solid 5-6" off and there isn't much to it, just pipe and packing, ground off the welds for the end piece of internal stainless (the curved piece that goes out the cap) fired up the welder and welded it to the chopped piece. Drilled some holes then threw it all back together and that was it.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
SuperMoto Junkie
1.8M posts
116.2K members
Since 2004
A forum community dedicated to SuperMoto owners and rally enthusiasts. Come join the discussion about on and off road racing, performance, modifications, troubleshooting, maintenance, and more!