SuperMoto Junkie banner

Excel, Warp 9, Marchesini, DNA

173K views 294 replies 75 participants last post by  peck1234 
#1 ·
We've got a lot of wheels in stock ready to ship NOW. Just poking around the shop here, we have the following in stock no waiting on aisle SUPERMOTO for these wheels:

Marchesini DRZ400
Excel/Talon - Honda CRF, Honda XR, Yamaha, RMZ
Warp 9, Honda XR, Suzuki DR650, Yamaha
DNA Honda CRF, RMZ450.

Also- great inventory right now on all Moto-Master race and street brake set-ups.

Good deals.
 
#191 ·
2009 WR250X Marchesini

Joe, just bought some Rizoma "action" turnsignals from you...they look GREAT.
I found a used set of marchesini wheels from an 08 WR250F and these look correct for my X.
17 x 4.5 rear and 17 x 3.5 front forged 10 spoke wheels.
My question is on sizing...are 08 WR250F wheels the same as 09 WR250X wheels??
Do I need spacers or a speedo drive?
Thanks, Doug
 
#192 ·
Joe, just bought some Rizoma "action" turnsignals from you...they look GREAT.
I found a used set of marchesini wheels from an 08 WR250F and these look correct for my X.
17 x 4.5 rear and 17 x 3.5 front forged 10 spoke wheels.
My question is on sizing...are 08 WR250F wheels the same as 09 WR250X wheels??
Do I need spacers or a speedo drive?
Thanks, Doug
Hey Doug

That is a no go on the wheels. The WR250X and R would be interchangeable but not the F.

Joe
 
#197 ·
As always, if you see a better price for any of our products, including our wheels, please let us know and we'll gladly match or beat it it. We don't do this so much with our kits as we pack our kits different than our competes and since we started the supermoto kit so long ago we have an edge in the parts we send out, normally.

But, we like to know when we can do better on price, so let us know.

Thanks.
 
#202 ·
I have Warp 9 on my CRF , seller told me they are tubeless. Are there any 17" W9 wheels that are tubeless for
And one other thing , What is the best price you can give me on the 17" front warp black ring alone ? :)
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top