- PC5 was backordered when I placed my order on 12/27. They expect new units to arrive on 1/3 and ship, hopefully, the same day.
- Orders have been shipped!
- PC5 has arrived! I'll do the install either on 1/8 or 1/9.
- PC5 successfully installed with DJ map #502.
Easy install, very clean software with on-the-fly stats. Bike finally feels like it has come to life, even with the DJ base map. I'm really looking forward to seeing what it can do after a full dyno tune!
DynoJet map for custom exhaust and intake: [23-015-502.pvm]
Rottweiler map: COMING SOON
Rexxer User Evo
TL;DR - Bought User Evo, couldn't get it work for almost 3 months. Come to find out, the Rexxer unit is incompatible with some firmware versions on the bike (there are 2 or more different ones). Rexxer will continue working on supporting the bike in the future, but no ETA at the moment.
So I went ahead and bought the Rexxer User Evo for my 701. It was shipped very quickly and arrived in nice packaging. Connecting it to my computer was a breeze, it auto-updated as soon as I opened up the software. This is about as far as I've been able to get so far.
Based on the instructions and word from Rexxer directly, I should have been able to plug the unit into the bike and load the stock map. Unfortunately, it doesn't seem to be recognizing the ECU
I then went ahead and double-checked the ECU service port wiring vs the cable that was given to me with the Rexxer. It definitely doesn't look right.
As you can see, one of the wires doesn't even go anywhere. From my limited knowledge, I'd assume there would be a power, ground, and signal wire. All of them actually leading somewhere.
For those of you that modified the KTM PC5 wiring, can you post up some pictures or wiring diagrams of what you changed? If it uses the same port, I may be able to figure out if I need to change anything on my end to make it work.