My first Sumo/build - 1999 wr400f
Results 1 to 10 of 10

Thread: My first Sumo/build - 1999 wr400f

\r\n\r\n
\r\n
\r\n \r\n
\r\n \r\n
\r\n Goatsby\r\n \r\n
\r\n Goatsby is offline\r\n\r\n \r\n \r\n Supermoto User\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n
\r\n
\r\n \r\n
\r\n
\r\n
Join Date
Dec 2016
\r\n \r\n \r\n
Posts
10
\r\n \r\n
\r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n\r\n
\r\n \r\n
\r\n \r\n

\r\n Default My first Sumo/build - 1999 wr400f\r\n

\r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n Just wanted to introduce myself and my bike! I\'m new to supermoto and dirtbikes in general. I\'m really young and have only owned two bikes so far, and on a whim and maybe a litttttle too impulsively picked up a 1999 WR400. Been blasting her up and down the street so far trying not to tip over from the height, and I\'m excited for the conversion, seems like it\'ll be a blast. My first bike was a 2007 EX250, my second bike (and now sitting in the garage with electrical problems) Is a 2005 Triumph Speed triple.
\r\n
\r\nNow on with the bike!
\r\n
\r\n\\
\r\n
\r\nHere she is, I payed 1,600 USD for it with a clean Oregon title. The title says "Motor Vehicle" on it and not off-highway vehicle like it does here, so if I\'m lucky I won\'t have to get a new street title for it. I may have over payed, but I went down saw it and rode it and it was tons of fun and seemed clean..ish? So I bought her then and there.
\r\n
\r\n
\r\n
\r\nMaybe not as clean as I thought.
\r\n
\r\n
\r\n
\r\n
\r\nThe can says GYT-R on it, is this an upgrade or OEM?
\r\n
\r\n
\r\nBasically the goal here is to do this on the cheap! I\'m going to relace 17" rims onto the hubs, and for now keep the stock braking setup until I figure out what I want to do from there. I have problems keeping motivated with my projects So maybe getting out on the 17s a little will keep me going on it. More to come as I get parts, thanks!\r\n
\r\n
\r\n\r\n \r\n\r\n\r\n
\r\n \r\n \r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n
\r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n'; pd[2063561] = '\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n #2\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n
    \r\n \r\n
    \r\n Kazi\r\n \r\n
    \r\n Kazi is offline\r\n\r\n \r\n \r\n Supermoto Abuser\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    May 2016
    \r\n \r\n \r\n
    Posts
    167
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Default \r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Nice bike! It should be a fun conversion. \r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
  • \r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n'; pd[2063889] = '\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n #3\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n
    \r\n \r\n
    \r\n Goatsby\r\n \r\n
    \r\n Goatsby is offline\r\n\r\n \r\n \r\n Supermoto User\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Dec 2016
    \r\n \r\n \r\n
    Posts
    10
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Default \r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n While waiting for some funds and titling process, I\'ve decided to start doing some of the "free mods" for this bike. I partially lowered the subframe and removed the airbox so I could accurately know how much to cut off the throttle lock, but I noticed that the slides seem to move all the way already. Does that mean the mod has already been done on this bike? Thanks.
    \r\n
    \r\n\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
  • \r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n'; pd[2076369] = '\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n #4\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n
    \r\n \r\n
    \r\n jimmycorp\r\n \r\n
    \r\n jimmycorp is offline\r\n\r\n \r\n \r\n Supermoto User\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Jan 2017
    \r\n
    Location
    Oak Park, CA
    \r\n \r\n
    Posts
    12
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Default \r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Any updates?
    \n
    \nSent from my BLU LIFE ONE X using Tapatalk\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
  • \r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n'; pd[2076377] = '\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n #5\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n
    \r\n \r\n
    \r\n Goatsby\r\n \r\n
    \r\n Goatsby is offline\r\n\r\n \r\n \r\n Supermoto User\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Dec 2016
    \r\n \r\n \r\n
    Posts
    10
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Default \r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Yes! This is where she sits now, I got a great deal on these wheels that I couldn\'t pass up, so if anyone is looking for some loose lace Warp 9s I have some for sale.
    \r\n
    \r\n
    \r\nThings that are left, cleaning, chain and sprockets, and street gear. I think I\'ll be shooting a video on how to wire up a DC conversion and all the street legal stuff for those who are scared of electrical things.\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
  • \r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n'; pd[2076497] = '\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n #6\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n
    \r\n \r\n
    \r\n jimmycorp\r\n \r\n
    \r\n jimmycorp is offline\r\n\r\n \r\n \r\n Supermoto User\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Jan 2017
    \r\n
    Location
    Oak Park, CA
    \r\n \r\n
    Posts
    12
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Default \r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Looks good man. I picked up a \'98 myself not too long ago.
    \n
    \nNon-running, going to get her back in tip top shape. Probably just dirt for now.
    \n
    \nDefinitely looking forward to the progression of your build.\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
  • \r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n'; pd[2076521] = '\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n #7\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n
    \r\n \r\n
    \r\n Goatsby\r\n \r\n
    \r\n Goatsby is offline\r\n\r\n \r\n \r\n Supermoto User\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Dec 2016
    \r\n \r\n \r\n
    Posts
    10
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Default \r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n She runs! It seemed like the idle bog came back but after it warmed up a while then disappeared..Or seemed to. I\'m running on the 14/52 gearing that came with the bike, just to see what I feel about before I decide what gearing I want to do. bad news is that the warp 9 rotor touches the back of the caliper! Is grinding it safe?\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
  • \r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n'; pd[2076673] = '\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n #8\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n \r\n \r\n Borg\'s Avatar\r\n \r\n \r\n \r\n
    \r\n \r\n
    \r\n Borg\r\n \r\n
    \r\n Borg is offline\r\n\r\n \r\n \r\n Supermoto Addict\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2011
    \r\n
    Location
    Fergus, Ontario
    \r\n \r\n
    Posts
    358
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Default \r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n What do you mean touches the back? You mean the edge of the rotor is hitting the caliper?
    \r\n
    \r\nIf the edge touches, you have the wrong relocation bracket.\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
  • \r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n'; pd[2076681] = '\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n #9\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n
    \r\n \r\n
    \r\n Goatsby\r\n \r\n
    \r\n Goatsby is offline\r\n\r\n \r\n \r\n Supermoto User\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Dec 2016
    \r\n \r\n \r\n
    Posts
    10
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Default \r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n The edge was touching, I ground down rotor diameter, it spins free now but makes a sound when I get on them.\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
  • \r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n'; pd[2079378] = '\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n #10\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n
    \r\n \r\n
    \r\n Goatsby\r\n \r\n
    \r\n Goatsby is offline\r\n\r\n \r\n \r\n Supermoto User\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Dec 2016
    \r\n \r\n \r\n
    Posts
    10
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n

    \r\n Default \r\n

    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n So I\'ve been looking at the wheel and it touches the right hand side of the caliper. I used this info https://www.thumpertalk.com/forums/t...hat-fits-what/ here, but I\'m starting to believe that the 02+ yz250f and 450f spacers are not correct for this year of bike with a 2002+ hub. Does anyone know any more spacer info regarding this year of Wr?\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
  • \r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n'; // next/previous post info pn[2063545] = "2079378,2063561"; pn[0] = ",2063545"; pn[2063561] = "2063545,2063889"; pn[2063889] = "2063561,2076369"; pn[2076369] = "2063889,2076377"; pn[2076377] = "2076369,2076497"; pn[2076497] = "2076377,2076521"; pn[2076521] = "2076497,2076673"; pn[2076673] = "2076521,2076681"; pn[2076681] = "2076673,2079378"; pn[2079378] = "2076681,2063545"; // cached usernames pu[0] = guestphrase; pu[184209] = "Goatsby"; pu[171977] = "Kazi"; pu[184738] = "jimmycorp"; pu[68017] = "Borg"; // -->

    Threaded View

    1. #1
      Join Date
      Dec 2016
      Posts
      10

      Default My first Sumo/build - 1999 wr400f

      Just wanted to introduce myself and my bike! I'm new to supermoto and dirtbikes in general. I'm really young and have only owned two bikes so far, and on a whim and maybe a litttttle too impulsively picked up a 1999 WR400. Been blasting her up and down the street so far trying not to tip over from the height, and I'm excited for the conversion, seems like it'll be a blast. My first bike was a 2007 EX250, my second bike (and now sitting in the garage with electrical problems) Is a 2005 Triumph Speed triple.

      Now on with the bike!

      \

      Here she is, I payed 1,600 USD for it with a clean Oregon title. The title says "Motor Vehicle" on it and not off-highway vehicle like it does here, so if I'm lucky I won't have to get a new street title for it. I may have over payed, but I went down saw it and rode it and it was tons of fun and seemed clean..ish? So I bought her then and there.



      Maybe not as clean as I thought.




      The can says GYT-R on it, is this an upgrade or OEM?


      Basically the goal here is to do this on the cheap! I'm going to relace 17" rims onto the hubs, and for now keep the stock braking setup until I figure out what I want to do from there. I have problems keeping motivated with my projects So maybe getting out on the 17s a little will keep me going on it. More to come as I get parts, thanks!

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •